Crossbuck Not Split Sliding Doors

Crossbuck Not Split Sliding Doors

Size: Two 4'3-1/2" width x 8'-0" height doors

Recommended Opening Measurement: 8'0"-8'3" width X 8'0" height

This door arrives completely assembled, no lumber to cut! All the necessary fasteners, hardware and lumber is included.

Heavy gauge non-rusting ALUMINUM is used throughout the door structure, except lumber. Full height 8'0" vertical, square tubing on both sides of door are added for rigidity and strength and reinforced header channels. All aluminum used is at least 1/8" quality thickness, no thin 1/16" material is used in the construction of this door. Concealed weldments are throughout door structure for the cleanest looking appearance in the stall manufacturing industry.

Lumber panels are surrounded and protected on all four edges of crossbuck lumber insert by channeling. Periodic maintenance, such as painting or staining is recommended. All counter sunk screw placements for a scratch free stall front wall.

These uniquely crafted stall doors are manufactured to fit over your 8'0" wide by 8'0" high door opening and a 7-1/2" header above your 8'0" opening is necessary for the track to mount.

• Completely Assembled
• Standard Two Panels per Opening/ One Panel Option Available
• 8’ Wide (Two 4’0”) Doors Overlay Your Openings, 3-1/2” on each Vertical End
• Heavy Gauge, Non-rusting Aluminum used Throughout Door Frames
• Full Height Vertical Tubing Reinforcements on Both Ends of Each Panel for Rigidity and Strength.
• Full Height Astragals Available
• Smooth surface panels on "interiors" of doors (design on exterior side only)
• Counter Sunk Screw Placements (Nothing sticking out to scratch wall areas.)
• Doors Arrive Unpainted - Painting or staining door lumber portion is recommended.
• Twin Panels of 5 layered, 3/4" thick lumber bonded with glue and wood screws at back of doors
• 1-1/2” Thick Lumber Panel
• Centers of door panels receive “center strips” placed strategically to create the appearance of a "split" Double Dutch Door
• Reinforced Header Channels (Square tubing welded to upper channel inside.)
• Surrounded Lumber Fascias (Channels protect all four edges of lumber panels.)
• All Necessary Hardware Included
• Galvanized, Overhead, Self-cleaning and Self-aligning Round Track
• Heavy-duty Adjustable Wall Mount Stay-roller
• Aluminum Door Stops Included
• 10” Heavy Duty Zinc Plated Door Handles
• Wood Lags Provided for Track, Stop, Handle Installation