Crossbuck Not Split Sliding Door
Size:
4'-3.5" width
8'-0" height
The Crossbuck Double Dutch Sliding Door is perfect for feed or tack rooms. This door arrives completely assembled, no lumber to cut! All the necessary fasteners, hardware and lumber is included. Doors arrive complete with one self cleaning galvanized overhead round 8'0" track, two ball bearing trolleys, two custom aluminum stops, one zinc plated Super latch, latch receiver plates, one neoprene adjustable stay roller and detailed installation instructions.
Heavy gauge non-rusting ALUMINUM is used throughout the door structure, except lumber. Full height 8'0" vertical, square tubing on both sides of door are added for rigidity and strength and reinforced header channels. All aluminum used is at least 1/8" quality thickness, no thin 1/16" material is used in the construction of this door. Concealed weldments are throughout door structure for the cleanest looking appearance in the stall manufacturing industry.
Lumber panels are surrounded and protected on all four edges of crossbuck lumber insert by channeling. Painting or staining door lumber portion is recommended. All counter sunk screw placements for a scratch free stall front wall.
This uniquely crafted stall door is manufactured to fit over your 4'0" wide by 8'0" high door opening and a 7-1/2" header above your 8'0" opening is necessary for the track to mount.
- COMPLETELY ASSEMBLED WITH HARDWARE
- Nothing to put together
- No Lumber to Cut
- No loose Pieces
- Heavy Gauge Non-Rusting ALUMINUM Used Throughout Door
- Full height 8'-0" Aluminum Vertical Square Tubing on Both Sides for Rigidity and Strength
- Counter Sunk Screw Placements (Nothing sticking out to scratch wall areas.)
- Surrounded Lumber Fascias (Channels protect all four edges of lumber panels.)
- Reinforced Header Channels (Square tubing welded to upper channel inside.)
- Centers of door panels receive two (2) center strips of 2"x1/8" flat bar placed strategically to create the appearance of a "split" Double Dutch Door.
- Panel of 3/4" BC Plywood bonded with glue and wood screws at back of doors.
- Painting or staining door lumber portion is recommended.
- Self-Cleaning Galvanized Overhead Door Track & Fasteners
- Zinc Plated Superlatch and Latch Receiver Plates
- Zinc Plated Adjustable Stay Roller with Non-rusting Neoprene Roller
- Smooth surface panels on "interiors" of doors (design on exterior side)
- Aluminum Door Stop Included
Comment