This catalog has no sub-catalogs.

Coolbreeze w Scuff Panel Gossip Gate

Product Code: #COOLWSPGG3

$485.00
Add Stallion Guard
Size

Coolbreeze w/ Scuff Panel Gossip Gate

Coolbreeze w/ Scuff Panel Zephyr-Top Gossip Gate

Sizes: 4'-0" width x 5'-0" height

Also available in 3' 11-1/2" width x 5'-0" height at no additional cost to accommodate a 4'-0" opening

The Coolbreeze Gossip Gate with Scuff Panel arrives fully assembled with 1" round pickets and a 1" between bar spacing on the top half and the best T&G #1 Southern Yellow Pine lumber installed in the lower half. Perfect for miniatures or foals because of the added airflow and visibility to the lower portion of the stall. The gossip gate frame is assembled with two 5'0" height capped channel posts which are secured to the zephyr style top at several points. The triple bar zephyr style gossip top is 12" higher than the upper horizontal channel encompassing the lower 1" spaced grille panel. Although the gate panel is completely welded as one piece, the apperance is weld free. The lower 2' lumber panel is secured together by glue and counter-sunk wood screws in rear of gate facia. After curing, the lumber is fitted in to the lower gate frame and moisture drainage vents are installed. It is recommended to paint or stain over the lower lumber panel once the gate is installed. Two 6" Tee Hinges and one Super brand latch and all the installation fasteners for lumber are included with each gate purchased. The gate size is 4’0” wide x 5’0” height and a finished opening width of 48-1/2” width is required for installation.

4'-0" width x 5'-0" height
Completely Assembled. Nothing to Put Together.
Tongue & Groove lumber Scuff Panel on bottom half of gate
Heavy gauge "non-rusting" ALUMINUM metal used throughout entire gate structure
Increased air flow provides instant cooling and fresh air at all times.
Ventilation as well as Socialization for Foals
Aluminum 1" Vertical round tubing.
"Formed" Triple Bar Zephyr-Top on both sides and full width upper channel.
Full height vertical channel materials both sides of door for maximum strength
Concealed "weldments" at Zephyr-Top to channel area underside.
Outside posts capped with ALUMINUM plates (concealed weldments also)
Instant Ventilation to Air Bound Stalls
6" "Zinc Plated" Tee-Hinges with all necessary fasteners included for lumber installation.
"Zinc-Plated" Superlatch and latching receiver plates and hardware included with all gossip gates.