This catalog has no sub-catalogs.

Flash-Panel Crossbuck Gossip Gate

Product Code: #FLCBGG3

$443.00
Add Stallion Guard
Add Vee Chew Guards
Size

Flash-Panel Crossbuck Gossip Gate

Flash-Panel Crossbuck Lumber Zephyr-Top Gossip Gate

Sizes: 4'-0" width x 5'-0" height

Also available in 3' 11-1/2" width x 5'-0" height at no additional cost to accommodate a 4'-0" opening

Add a Little "FLASH" to Your Stall Doors. Arrives Installed on Door or Install Yourself and Save! Flash Panels can be added to an Existing Armour Dutch Door, check out the Stall and Barn Accessories page for more info.

The Flash-Panel Crossbuck Gossip Gate arrives fully assembled with the "X" fascia lumber installed into the handcrafted 1/8" heavy duty aluminum frame. The gossip gate frame is assembled with two 5'0" height capped channel posts which are secured to the zephyr style top at several points. The triple bar zephyr style gossip top is 12" higher than the upper horizontal channel encompassing the lower lumber panel. The lumber panel is secured together by glue and counter-sunk wood screws in rear of door facias. Painting or staining door lumber portion is recommended. After curing, the lumber is fitted in to the gate frame and moisture drainage vents are installed. Two 6" Tee Hinges and one Super brand latch and all the installation fasteners for lumber are included with each gate purchased. The gate size is 4’0” wide x 5’0” height and a finished opening width of 48-1/2” width is required for installation.

Add a Little "FLASH" to Your Stall Doors
Arrives Installed on Door or Install Yourself and Save!
Completely Assembled.
Heavy gauge "non-rusting" ALUMINUM metal used throughout entire gate structure (except lumber).
"Formed" Triple Bar Zephyr-Top on both sides and full width upper channel.
Full height vertical channel materials both sides of door for maximum strength.
Concealed "weldments" at Zephyr-Top to channel area underside.
Surrounded lumber fascias (channels protect all four edges of lumber panels)
Outside posts capped with ALUMINUM plates (concealed weldments also)
Painting or staining door lumber portion is recommended.
6" "Zinc Plated" Tee-Hinges with all necessary fasteners included for installation.
"Zinc-Plated" Superlatch and latching receiver plates and hardware included with all gossip gates.
Smooth surface inside door panel
All lumber secured with glue and countersunk wood screws on rear panels.