“BREEZEWOOD” DOOR PANELS Ventilation and Function Combined
Size:
4'-3.5" width
8'-0" or 7'-0" height
An inexpensive way to provide additional ventilation to your horse stalls while obtaining a fresh new interior look! Our newest innovation, these Ventilated lumber panels are available in Dutch Doors, Sliding Doors, OR the whole Stall Front. The 1-1/2” Thick Panels can be ordered in a variety of uniquely made patterns, some of which are shown here. Breezewood panels can be custom made in accordance with your own design or requirements, consider adding your horse or farm name for an added personal touch! The panels can be painted or stained to match your decor, and can also be ordered with a solid back panel. Please call for details and pricing: 800-876-7706
Our Baton Panel is produced with conservatism in mind since it blends nicely with the vertical picket placements of our sliding doors and stall grilles and does not overpower the frontage. A touch of class with an abundant airflow benefit.
Armour’s Breezewood Sliding Stall Doors have 1” round tubes and 1/8” non-rusting aluminum framing which is welded to form a strong and unmarred appearance. Doors are reinforced with an extra length of square tubing down each side for added rigidity and strength. All doors arrive assembled with no rattling pieces, with the best 8’0” round track, heavy duty ball-bearing trolleys, aluminum stops, sliding-bolt latch, and heavy-duty adjustable stay-roller, and fasteners for lumber installations.
This uniquely crafted stall door is manufactured to fit over your 4'0" wide by 8'0" high door opening and a 7-1/2" header above your 8'0" opening is necessary for the track to mount.
- COMPLETELY ASSEMBLED WITH HARDWARE
- Ventilation and Function Combined
- Ventilated 1-1/2” thick lumber panel in lower 4' of door
- Breezewood panels can be custom made in accordance with your own design or requirements, consider adding your horse or farm name for an added personal touch!
- Breezewood panels can also be ordered with a solid back panel
- Nothing to put together
- No Lumber to Cut
- No loose Pieces
- Heavy Gauge Non-Rusting ALUMINUM Used Throughout Door
- Full height 8'-0" Aluminum Vertical Square Tubing on Both Sides for Rigidity and Strength
- Through Punched Picket Holes at 3" Between Bar Spacing
- Schedule 40 Round ALUMINUM Pickets 1" in Diameter
- Counter Sunk Screw Placements (Nothing sticking out to scratch wall areas.)
- Surrounded Lumber Fascias (Channels protect all four edges of lumber panels.)
- Reinforced Header Channels (Square tubing welded to upper channel inside.)
- Painting or staining door lumber portion is recommended.
- Self-Cleaning Galvanized Overhead Door Track & Fasteners
- Zinc Plated Superlatch and Latch Receiver Plates
- Zinc Plated Adjustable Stay Roller with Non-rusting Neoprene Roller
- All Necessary Screws, Lags, Bolts, and Instructions Required to Install Sliding Doors on Lumber Barns Included
- Aluminum Door Stop Included
Comment