Add a Little "FLASH" to Your Stall Doors
Size:
4'-3.5" width
8'-0" or 7'-0" height
Add a Little "FLASH" to Your Stall Doors. Arrives Installed on Door or Install Yourself
and Save! Flash Panels can be added to an Existing Armour Dutch Door, check out the Stall and Barn Accessories page for more info.
The Flash-Panel Crossbuck Sliding Stall Door with Bar Top arrives completely assembled, no
lumber to cut! All the necessary fasteners, hardware and lumber is included. Doors arrive
complete with one self cleaning galvanized overhead round 8'0" track, two ball bearing
trolleys, two custom aluminum stops, one zinc plated Super latch, latch receiver plates, one
neoprene adjustable stay roller and detailed installation instructions.
Heavy gauge non-rusting ALUMINUM is used throughout the door structure, except lumber. Full
height 8'0" vertical, square tubing on both sides of door are added for rigidity and
strength and reinforced header channels. Bar Top is constructed of schedule 40 round pickets
of 1" diameter throughout the door’s top. All aluminum used is at least 1/8" quality
thickness, no thin 1/16" material is used in the construction of this door. Concealed
weldments are throughout door structure for the cleanest looking appearance in the stall
manufacturing industry.
Lumber panels are surrounded and protected on all four edges of the crossbuck lumber insert
by channel. Painting or staining door lumber portion is recommended. All counter sunk screw
placements for a scratch free stall front wall.
This uniquely crafted stall door is manufactured to fit over your 4'0" wide by 8'0" high
door opening and a 7-1/2" header above your 8'0" opening is necessary for the track to
mount.
Also available is our 7' model, manufactured to fit over your 4'0" wide by 7'0" high door
openings.
PLEASE SELECT THE SIZE THAT FITS YOUR NEED
- Add a Little "FLASH" to Your Stall Doors
- Arrives Installed on Door or Install Yourself and Save!
- Add to an Existing Armour Dutch Door
- Nothing to put together
- No Lumber to Cut
- No loose Pieces
- Heavy Gauge Non-Rusting ALUMINUM Used Throughout Door
- Full height 8'-0" Aluminum Vertical Square Tubing on Both Sides for Rigidity and Strength
- Through Punched Picket Holes at 3" Between Bar Spacing
- Schedule 40 Round ALUMINUM Pickets 1" in Diameter
- Counter Sunk Screw Placements (Nothing sticking out to scratch wall areas.)
- Surrounded Lumber Fascias (Channels protect all four edges of lumber panels.)
- Reinforced Header Channels (Square tubing welded to upper channel inside.)
- Painting or staining door lumber portion is recommended.
- Self-Cleaning Galvanized Overhead Door Track & Fasteners
- Zinc Plated Superlatch and Latch Receiver Plates
- Zinc Plated Adjustable Stay Roller with Non-rusting Neoprene Roller
- All Necessary Screws, Lags, Bolts, and Instructions Required to Install Sliding
Doors on Lumber Barns Included
- Aluminum Door Stop Included
Comment