Windsor Sliding Door
Size:
4'-3.5" width
8'-0" or 7'-0" height
Among the newest of Armour’s stall doors: this Windsor Sliding Door arrives with all the necessary lumber and hardware to hang, slide and latch each stall door. Each stall door is delivered assembled with the decorative Windsor lumber panel installed. Equipped with the best 8’0” round track, ball-bearing trolleys, slide bolt zinc plated latch for installation. This door is only for discriminating horse owner’s, who wish to have an executive stall appearance. Lumber cutout of Horse names or farm logo can be affixed on front center of lumber panel for an additional layout cost, please call 800-876-7706 for details.
Heavy gauge non-rusting ALUMINUM is used throughout the door structure, except lumber. Full height 8'0" vertical, square tubing on both sides of door are added for rigidity and strength and reinforced header channels. Bar Top is constructed of schedule 40 round pickets of 1" diameter throughout the door’s top. All aluminum used is at least 1/8" quality thickness, no thin 1/16" material is used in the construction of this door. Concealed weldments are throughout door structure for the cleanest looking appearance in the stall manufacturing industry.
Windsor Lumber panels are surrounded and protected on all four sides of the lumber insert by channeling. Painting or staining door lumber portion is recommended. All counter sunk screw placements for a scratch free stall front wall.
This uniquely crafted stall door is manufactured to fit over your 4'0" wide by 8'0" high door opening and a 7-1/2" header above your 8'0" opening is necessary for the track to mount.
Also available is our 7' model, manufactured to fit over your 4'0" wide by 7'0" high door openings.
PLEASE SELECT THE SIZE THAT FITS YOUR NEED
- CUSTOM Name or Logo Available on Door Front for Additional Cost
- Nothing to put together
- No Lumber to Cut
- No loose Pieces
- Heavy Gauge Non-Rusting ALUMINUM Used Throughout Door
- Full height 8'-0" Aluminum Vertical Square Tubing on Both Sides for Rigidity and Strength
- Through Punched Picket Holes at 3" Between Bar Spacing
- Schedule 40 Round ALUMINUM Pickets 1" in Diameter
- Counter Sunk Screw Placements (Nothing sticking out to scratch wall areas.)
- Surrounded Lumber Fascias (Channels protect all four edges of lumber panels.)
- Reinforced Header Channels (Square tubing welded to upper channel inside.)
- Painting or staining door lumber portion is recommended.
- Self-Cleaning Galvanized Overhead Door Track & Fasteners
- Zinc Plated Superlatch and Latch Receiver Plates
- Zinc Plated Adjustable Stay Roller with Non-rusting Neoprene Roller
- All Necessary Screws, Lags, Bolts, and Instructions Required to Install Sliding Doors on Lumber Barns Included
- Aluminum Door Stop Included
Comment